Cooling Inspection includes check for/of:
|
Heating Inspection includes check for/of:
|
Proper refrigerant charge
|
Burners, clean as required
|
Amperage & voltage of condenser motor
|
Flue pipe and draft diverter
|
Capacitor/relays/contactor
|
Heat exchanger for cracks
|
Outdoor condenser coils & rinse
|
Safety controls & limits
|
Thermostat for proper calibration
|
Furnace gas valve
|
Tighten electrical connections
|
Gas line and connections @ furnace
|
Primary & secondary drain pans, add algae tabs
|
Indoor blower motor, indoor blower wheel and belts
|
Clear primary & secondary drain lines
|
Indoor blower motor voltage & amperage
|
Evaporator coils (if accessible)
|
Light pilot light (if applicable)
|
Air leaks @ furnace, coil, return and supply
|
Air leaks @ furnace, coil, return and supply
|
Air filters
|
Air filters
|
Safety controls
|
Lubricate indoor motor
|
Temperature drop across evaporator coil
|
Thermostat for proper calibration
|
Indoor blower motor/wheel
|
|